Coil tolling striker
Coil tolling striker
This striker is used to toll bells, on time of hourly ringing: hour, half, quarter, Westminster, knell or angelus, or when every other tolling is needed.
In each these cases, the bell does not move and the striker mass comes to strike the outer side of bell.
The coil tolling striker is better suited to smallest bells and chimes than the motorized striker.
The striker is electrically controlled according the needs by a master clock or knell either angelus controller.
- Steel mass, spherical and adjustable
- Up and down stop screws, with rubber blocks
- Watertight connecting box
- Breaker rectifier supplied
- Painted steel framework
| Ref: |
Weight of bell Kg |
A (mm) |
B (mm) |
C (mm) |
D (mm) |
E (mm) |
F (mm) |
G (mm) |
H (mm) |
Diam. |
Current (A) |
Weight (Kg) |
| EH2 |
< 70 |
155 |
60 |
175 |
80 |
75 |
40 |
80 |
410 |
9 |
2 |
5 |
| EH3 |
70 to 200 |
170 |
60 |
190 |
80 |
95 |
50 |
100 |
420 |
11 |
2,5 |
6 |
| EH4 |
200 to 560 |
190 |
100 |
210 |
120 |
125 |
70 |
120 |
500 |
11 |
3 |
12 |
Motorized Striker
Motorized Striker
This striker is used to toll bells, on time of hourly ringing: hour, half, quarter, Westminster, knell or angelus, or when every other tolling is needed.
In each these cases, the bell does not move and the striker mass comes to strike the outer side of bell. The coil tolling striker is better suited to smallest bells and chimes than the motorized striker.
- Steel mass
- Up and down stop screws, with rubber blocks
- Supplied with separate breaker
| Ref: |
Weight of bell (Kg |
Current 220 V T-ph (A) |
Current 380 V T-ph (A) |
Current 220 V S-ph (A) |
Striker Weight (Kg) |
| T1 |
< 500 |
9,20 |
5,30 |
8 |
25 |
| T2 |
500 to 1200 |
9,20 |
5,30 |
8 |
27 |
| T3 |
1200 to 1800 |
9,20 |
5,30 |
8 |
30 |
Download the pdf documentation
Came striker
Came striker
This unit is made to drive an in our outdoor striker, with a pulling cable.
It is particularly designed to strike bells up to about 200Kg.
General features :
- Pulling range : adjustable from 50 to 100 mm
- Pulling cadence max. : 1 per second
- Drived by impluse : 0,5 second
Technical features :
- Motor-brake 230V - 2,5A
- Dimensions : L365 x l180 x H235 mm
- Weight : 10 kg
- Protection : IP444
Version française
